Three measured variables in one transformer-mounted device
The final implementation follows the confirmed model code, outline drawing and terminal diagram.
Monitoring Devices manufacturer
Oil Temperature, Level and Pressure Monitoring Device
An integrated transformer monitoring device for oil temperature, oil level and absolute pressure with RS485 output.
IB-YKTCF-OL/OP Functions for Transformer Temperature Control
Confirm how the selected configuration will indicate temperature, operate contacts and communicate with the remote system.
RS485 connection to an intelligent terminal
The final implementation follows the confirmed model code, outline drawing and terminal diagram.
IP68 enclosure and DC 12-24 V supply
The final implementation follows the confirmed model code, outline drawing and terminal diagram.
IB-YKTCF-OL/OP Technical Specifications
Use these values for initial comparison, then confirm the selected suffix, options and project interfaces in the current model documents.
| Temperature range | -45.0°C to 200.0°C |
|---|---|
| Temperature accuracy | ±2°C from -45°C to 100°C; ±2% from 100°C to 200°C |
| Temperature resolution | 0.1°C |
| Absolute pressure range | 71-181 kPa |
| Pressure accuracy and resolution | ±2 kPa; 1 kPa |
| Oil-level range | 0 to -35 mm |
| Oil-level accuracy and resolution | ±2 mm; 1 mm |
| Operating ambient | -40°C to +70°C; up to 95% RH at 25°C |
| Atmospheric pressure | 80-110 kPa |
| Protection grade | IP68 |
| Power supply | DC 12-24 V; consumption ≤5 W |
| Communication | RS485 |
| Standard cable | 5 m, 4-core shielded cable with bendable stainless corrugated tube |
IB-YKTCF-OL/OP Product Overview
This integrated device monitors three operating values on an oil-immersed transformer: oil temperature, oil level and absolute pressure. It sends measured data through RS485 to a compatible intelligent terminal.
The device is intended for transformer or combined-substation monitoring where a single field assembly can reduce separate sensor locations. Integration still requires an agreed communication map, supply, cable route, installation interface and alarm policy in the supervisory system.
How Does the IB-YKTCF-OL/OP Temperature Measurement Work?
Dedicated sensing elements measure temperature, float-related oil level and absolute pressure. The internal electronics condition the measurements and expose them over RS485.
Unlike a mechanical OTI or WTI, this product depends on external power and a digital receiving system. The selection decision should therefore include communications, cyber and maintenance requirements as well as mechanical fit.
How to Select the IB-YKTCF-OL/OP
Confirm transformer type, mounting opening, oil-level geometry, required pressure reference, RS485 protocol details, supply, cable length and receiving terminal.
Confirm whether the project needs only measurement or also local alarm logic in the upstream controller.
IB-YKTCF-OL/OP Installation and Commissioning
The referenced installation uses a traditional oil-level-gauge mounting location near the transformer side edge. Confirm the final drawing and sealing interface before machining or retrofit.
Connect the shielded cable to the fusion or intelligent terminal and DC supply according to the model-specific wiring instructions. Validate scaling and alarm thresholds in the receiving system.
IB-YKTCF-OL/OP Transformer Applications
Smart distribution transformers
Confirm the measurement point, contact logic, output and mechanical interface against the transformer project documents.
Combined substations
Confirm the measurement point, contact logic, output and mechanical interface against the transformer project documents.
Remote transformer condition monitoring
Confirm the measurement point, contact logic, output and mechanical interface against the transformer project documents.
Oil temperature, level and pressure integration
Confirm the measurement point, contact logic, output and mechanical interface against the transformer project documents.
Specifications and available options vary by model configuration. Request the current datasheet, outline drawing and terminal diagram before approving an order.
Related IB-YKTCF-OL/OP Selection Resources
Compare the Product Category
Review other models for the same transformer temperature measurement and control function.
Compare monitoring devicesPlan Cooling, Alarm and Trip Control
Review how OTI and WTI contacts support transformer cooling stages and protection logic.
Transformer cooling and protection applicationPrepare a Replacement
Compare existing codes, outputs, capillary routing and mounting interfaces before a controller replacement.
Transformer OTI and WTI replacement guideReview Supplier Documents
Check available management-system, conformity and qualification materials for procurement review.
Certification and qualification documentsDirect engineering contact
Request IB-YKTCF-OL/OP Selection and Pricing
Email the transformer type, model reference, measuring range, output, switch contacts, capillary length, quantity and destination country. INNO will reply with the applicable configuration details.